DIVE INTO A NEW EXPERIENCE - SETTING UP YOUR NEW SHOWER UNIT

Dive Into A New Experience - Setting Up Your New Shower Unit

Dive Into A New Experience - Setting Up Your New Shower Unit

Blog Article

View More



Just about everyone seems to have their personal opinion about How to Install a Shower Enclosure .


How to Install a Direct-to-Stud Shower Enclosure
An effective shower installment requires cautious preparation and also a lot of work. For the most part, you will certainly require to do 3 types of tasks: framing walls, installing the plumbing, as well as completing wall surfaces.

Prep work


Firstly, you must decide on the type of shower that you wish to install. It is essential to establish whether the picked shower can coping with certain systems and also can regulate a safe level of water through the boiler. Many shower units nowadays are designed to be flexible to different water pressures (such as stored hot water and chilly mains).
It is likewise crucial to take into consideration the water pressure as well as the planning of the piping as well as drain for the shower

Different Types of Shower Units


  • Push-on Mixer: The hose pipe as well as spray parts of the push-on mixer shower system can be linked to the bath tap based on your need, and also the water temperature level can be readjusted using the faucets. Push-on mixers are cheap and also very easy to set up. Nevertheless, although the hose pipe connection is simple, it is easily displaced. In addition, it is bothersome to readjust the temperature level.

  • Bath/Shower Mixer: The hose pipe as well as spray of this type of shower are combined with a bathroom mixer faucet, as well as the temperature can be adjusted through the bathroom faucets. It is an extremely low-cost choice and no extra plumbing is entailed. Nevertheless, the bath/shower mixers likewise struggle with inconvenient temperature level control choices.

  • Manual Mixer: The hose and also spray of a hands-on mixer shower unit are a part of the wall surface system and also the cold and hot water materials are connected to a solitary shutoff The temperature and also stress of the water are managed through either one or a selection of knobs (in more costly showers). Although temperature control is a lot easier in hands-on mixer types, they are extra costly than the previously stated mixers. They likewise require added plumbing of hot and cold water supply pipelines.

  • Thermostatic Mixer: The hose pipe and spray of this shower type belong of the wall device and the cold and hot water products are linked to a solitary valve below too. It is total with an integrated stabiliser to self-adjust the water temperature level and to stop it from becoming as well warm. One of the greatest advantages of a thermostatic mixer shower kind includes hassle-free temperature control. Nevertheless, it is one of the most pricey of the different mixer choices.

  • Power Shower: A power shower is a solitary unit consisting of an effective electric pump that can modifying both the water pressure as well as temperature level. This kind of shower can be fitted if there is water supply from a cold water cistern as well as a warm water cyndrical tube. A power shower makes the adjustment of both stress and also temperature easy. On the other hand, it disagrees for water warmed directly by the shower or where the water is provided by a combination central heating boiler under keys pressure.

  • Electric Shower: An electrical shower is plumbed right into a mains cold water supply and also it heats the water electrically. It is essential to keep in mind that for this shower type to be installed, the mains stress requires to be at the very least 0.7 kg/sq centimeters (10lb/sq in). The unit allows the temperature and pressure to be changed by means of a handle. Versions with temperature level stabilisers are much better as they remain unaffected by various other faucets elsewhere being used within the family. A significant drawback of electric showers is that the control handle only enables the alternative of heats at less pressure, or reduced temperature levels at a better pressure. This is troublesome in the winter when the spray is usually weak and also the keys water is colder. However, this problem is tackled in some models which are available with a winter/summer setting.


  • Method


    Depending on the type of shower you wish to install, the shower head must either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
    Prior to beginning, it is recommended to mark the positions of the shower head and also control, as well as to prepare the pipe-work involved. Furthermore, the drainage system to get rid of the drainage will require to be prepared. Both placements of the cord route and also the shower switch will certainly likewise require to be thought about if an instant or electrical shower system is being set up.
    Use the guideline guide provided with the shower device to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is important to remove the water system. In order to safeguard the pipes, they need to be offered a water resistant covering and also fitted with separating valves. The pipes can after that be buried right into the wall surface as well as glued over to neaten the general look.
    Fit the base tray, shower head, and installations.
    Attach the primary shower control to the pipes that will be providing the water (This may need a female screw string adapter).
    Reconnect the water system and also examination the pipelines for any kind of leakages, as some may need tightening.
    If you are installing an electrical shower, bear in mind to switch off the electrical power supply before making any type of electric links. As soon as these connections have been made (there ought to be support within the user's manual), the power supply can be switched over back on.

    Readjusting Water Stress to Suit Your Shower


    The cold water tank can be raised to a better height (often just 150mm (6inches)) by fitting a strong wooden assistance underneath it - perhaps composed of struts as well as blockboards. If you pick this option, the primary and also distribution pipes will certainly also have to be elevated to meet the new elevation of the reservoir.
    Additionally, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it needs to be attached into the power supply in order to operate.

    Piping as well as Water drainage


    It is best to use 15mm diameter supply pipelines, and make the go to the shower as short as well as straight as feasible so as to preserve optimal pressure and also reduce heat loss. Furthermore, by reducing the use of arm joints for pipeline corners, you can reduce the resistance in the circulation of the water supply. You can achieve this by bending the pipelines rather.

    Many Typical Blunders


  • Violating or neglecting neighborhood code restrictions.

  • Utilizing pipelines that are also small.

  • Connecting copper to galvanized without making use of a brass or dielectric suitable between the two.

  • Not utilizing tape or pipeline substance at threaded joints.

  • Not leveling your fixtures when mounting them.

  • Not mounting an air void filling for fixtures.

  • Reducing supply stub outs also brief to install the shutoff valves onto after the completed wall surface is in location.

  • Not effectively aligning tubing right into installations or stop shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will certainly create a leak.).

  • When turning the water back on in your house, constantly run the outside hose pipe shutoff or purge your toilets to bleed dirt as well as air from the lines. This particles can cause issues in your sink taps and various other plumbing trim.



  • Shower enclosures for bathrooms


    It makes your bathroom look like a luxury suite:


    Installing a new shower cubicle in your bathroom is an excellent way to make it look like a luxury suite. Nothing says modern elegance like a glass shower enclosure. Made with 8 mm easy clean glass, Jauqar shower enclosures come in varied colors and sizes to fit perfectly with your existing bathroom size & decor. The high-quality enclosures come with concealed fixings and silent cushion closing to ensure a great showering experience.


    Adds style to your bathroom:


    Shower cubicles are one of those shower products that can make your bathroom look modern, wide, and visually appealing. Jaquar shower enclosures are available in various styles, so you can find the one that fits your bathroom's overall design. Whether you prefer rectangular enclosures or fancy curved designs, Jaquar has it all.


    Enhances Personal Hygiene:


    Waking up in the morning to a filthy, muddy bathroom can ruin your day. Jaquar shower enclosure helps keep your bathroom clean and hygienic. A shower enclosure helps keep the water inside and off your bathroom flooring. Allowing water to spill out on a hard surface can lead to mold, mildew, and build-up on the tiles and other flooring surfaces, which can be unhygienic and unattractive.



    As all Jaquar shower enclosures are built to conform to the highest safety standards, you can be rest assured that they are completely watertight. This means you won't have to worry about leakages damaging your bathroom floor or ceiling—or worse yet, creating mold and mildew.


    Elevates your shower experience:


    A great shower combines many factors - optimum water pressure, apt water temperature, and great aesthetics during and after the shower. After all, who loves to clean the dirty floor just after a relaxing shower? With Jaquar shower enclosures, you can improve your experience by keeping the water within a specific area, so there is no cleaning post your shower. Offering style and function, our shower enclosures make your everyday life easier.


    Space-effective:


    Shower enclosures give you more space without sacrificing style. It can be a challenge finding both in today's modern bathroom, but a Jaquar shower enclosure will provide you with both. Unlike big, bulky shower enclosures, Jaquar's shower enclosures come in standard sizes that are good enough to fit any space- from large bathrooms with walk-in closets to bathrooms that need extra storage space. You can also customize the size as per your preference.


    Ensures safety with impressive safety features:


    Jaquar shower enclosures are designed with the highest safety standards. They come in different sizes and designs, along with toughened safety glass, high-quality hinges, and locking mechanisms that help keep you safe from injury while allowing you to feel at ease when taking a relaxing shower. A secure enclosure means no chance of slipping on wet bathroom floors.

    https://www.jaquar.org.uk/blog/why-shower-enclosure-are-important


    How to Install a One-Piece Shower Unit

    Hopefully you liked our part about How to Install a Direct-to-Stud Shower Enclosure. Thanks a lot for taking time to read our blog post. Please set aside a second to distribute this content if you appreciated it. Thank you so much for your time spent reading it.




    Book With Us Today!


    Report this page